CTC Union FMC-2000MS - System

21
3.1.5 System
< System >
<1> Information
<2> IP
<3> SNTP
<4> Time Zone
<5> Log
<6> Work in [Switch] Mode
** In converter mode, the CPU port will be disconnected.
[ESC] Go to previous menu. Please select an item.
<1> Information: Display the MAC, Date, Uptime, S/W Version, S/W Date and setup the SNMP System Contact, Name and Location.
{ System > Information }
MAC Address [00:02:AB:95:21:CE]
System Date [2022-02-23 T11:13:14+08:00]
System Uptime [0d 03:32:35]
Software Version [Ver 1.002]
Software Date [2022-06-20 T08:22:27+08:00]
Configuration file [Default-Config.txt]
<1> Contact [techsupport@ctcu.com ]
<2> Name [FMC-1000MS-250 ]
<3> Location [LAB ]
<2> IP: Display the device MAC address, set the management VID, IPv4/IPv6 IP address(es), Netmask, Gateway or enable DHCP(6) client.
{ System > IP }
MAC Address [00:02:AB:95:21:CE]
IPv6 [FE80::202:ABFF:FE95:21CE]
<1> VLAN ID [1]
<2> IPv4 DHCP [Disable]
<3> IPv4 [ 10. 1. 1. 1]
<4> Netmask [255.255.255. 0]
<5> Gateway [ 10. 1. 1.254]
<6> IPv6 DHCP [Disable]
<7> IPv6 [::]