CTC Union FMC-2000MS - Link OAM

26
3.1.8 Link OAM
This media converter supports standard IEEE802.3ah OAMPDU such as discovery, loopback and dying gasp. Additionally, organizational
specific OAMPDU are used to create layer 2 in-band management between a local and a remote converter, either another FMC-2000MS or a
legacy FMC-1000MS.
{ Link-OAM }
<1> Port Settings
<2> Port Statistics
<3> Port Status
<4> Remote Device (FMC-2000MS)
[ESC] Go to previous menu. Please select an item.
<1> Port Settings: Brings up the sub-menu for OAM port settings.
LAN FIBER
------------- -------------
OAM Enabled <1> [V] <5> [V]
OAM Mode <2> [Passive] <6> [Passive]
Loopback Support <3> [V] <7> [V]
Loopback Operation <4> Trigger <8> Trigger
<1> toggles LAN OAM enabled/disabled
<2> toggles LAN OAM mode passive/active
<3> toggles LAN port support for OAM loopback enabled/disabled
<4> triggers the LAN loopback operation
----------------------------------------------------------
<Y> Loopback Operation <ESC> Exit
<5> toggles Fiber OAM enabled/disabled
<6> toggles Fiber OAM mode passive/active
<7> toggles Fiber port support for OAM loopback enabled/disabled
<8> triggers the Fiber loopback operation
----------------------------------------------------------
<Y> Loopback Operation <ESC> Exit