PROFESSIONAL CHARGING
IN CONSUMER FORMAT
CTEK MXS 10
The MXS 10 is a charger that offers state of the art technology. It
is ideal for professional use and excellent in workshops, caravans,
RVs, boats or cars. The MXS 10 is perfect for solving a broad range
of battery problems. It offers features such as battery diagnosis that
shows if a battery can receive and retain a charge, a special recon-
ditioning function that restores stratified and deeply discharged bat-
teries, unique maintenance charging and a temperature sensor for
optimised charging regardless of the weather conditions. It also has
a power supply mode which allows the battery to be disconnected
from the vehicle without losing important configurations. The unique
display allows the user to follow the entire charging process.
The MXS 10 is a fully automatic 8-step charger that delivers 10 A
to 12 V batteries from 20–200 Ah and is suitable for maintenance
charging up to 300 Ah. The charger is IP65 classified (splash and
dust proof), designed to protect vehicle electronics, non-sparking,
reverse polarity protected, and short-circuit proof. It is delivered with
a 2-year warranty.
TECHNICAL DATA
CHARGING VOLTAGE 14.4/14.7/15.8 /13.6 V
CHARGING CURRENT Max 10 A
TYPE OF CHARGER 8 step, fully automatic charging cycle
TYPE OF BATTERY 12 V lead-acid batteries
BATTERY CAPACITY 20–200 Ah, up to 300 Ah for maintenance
INSULATION IP65 (splash and dust proof)
AUTO
Fully automatic for optimal charging
For all lead-acid batteries
fully charged battery
Maintenance charging
Temperature sensor
For charging in cold conditions and AGM
batteries
Recondition of deeply discharged batteries
Use the charger as a power supply
To Next Page
Need help?
General
