Leddura 2Share
1918
Manual CTOUCH Wallom2 wall lift
Share, inspire, have fun!
With CTOUCH by your side.
ctouch.eu
Picture
Picture Mode Select picture mode
Contrast Adjust the contrast
Brightness Adjust the brightness
Hue Adjust the image hue (Only for NTSC system)
Sharpness Adjust the sharpness
Saturation Adjust the color saturation
Backlight Set up the overall brilliance of the screen
Energy Save Mode The backlight brightness is decreased
VGA Screen Adjust
Clock Adjust the screen size
Phase Adjust the focus of stable images
H-Position Move the image right or left
V-Position Move the image up or down
Auto Adjust Automatically adjust the image settings such as position and phase
Blue Light Filter Set the blue light filter
Blue Light Level Set the blue light level
Color Temperature Select the color temperature
If you select User, you can set the level of the red/green/blue as your desired
Zoom Mode Select the aspect ratio (display proportions) according to your video signal type or
personal preference
OverScan Adjust the reproduction ratio, you may activate this function to obtain a cleaner picture
DISPLAY MENU
ADJUSTING PICTURE MODE
ADJUSTING SOUND MODE
Sound
JBL® Sound Mode Select sound mode
Bass Adjust Bass (low sounds)
Treble Adjust Treble (high sounds)
Balance Adjust volume level of right and left speakers
AVC Select [On] to equalize overall volume levels across all channels
Select [Off] to turn off the auto volume control
JBL® LiveStage Turn the surround sound effect on or off
SPDIF Output Turn on or off
SPDIF Mode Select the digital audio output mode for S/PDIF
Select [RAW] to output audio signal as its original format
Select [PCM] to output audio signal by PCM format
SPDIF Volume Adjust SPDIF volume
To Next Page
Loading...
Need help?
General
