4
）
Write protect
：
Lock the file. It can avoid accident deletion.
Options
：【
Write-protect current file
】
/
【
Write-protect all files
】
/
【Unlock current file】/【Unlock all files】.
Aligning the camera
In test mode you can adjust the optimum exposure angle and the
range of the motion sensors.During alignment, consider whether
the use of the side motion sensors may be useful for attaining the
desired observation results. You can activate/deactivate the side
motion sensors using the above-described menu.
Please adjust the camera as follows:
1. Fasten the camera to a tree or similar object at a height of 1–2
meters and align the camera in the desired direction. Then move
slowly from one side of the target area to the other side. While
doing this, monitor the motion display.
2. If this lights turn blue, you are detected by one of the activated
side motion sensors . If lights turn red, you are detected by the
front motion sensor . By this way, you can align the camera to the
best angle and distance.
Working Mode
Switch the Mode Button to “On”. After turn on the camera, the
screen will display 15 seconds countdown. Then the LEDs and
screen will go out. The camera begins to operate independently
and enter standby mode.
To Next Page
Loading...
Need help?
General