If the wild animals enter the detection range of the motion
sensors , the camera will be activated and detect the motion trail.
If the wild animals continue to move to the detection zone of the
sensor, the camera will take photos or record video automatically.
When the wild animals leave the detection zone of the sensors ,
the camera will be deactivated and turn back to standby mode.
Mounting Guide
You can mount the camera permanently on a wall or tree using
the supplied wall bracket. Before mounting the wall bracket you
should ensure that all screws are tight.The best distance from the
ground is about 1 meter.
Components
1. Tripod screw
2. Lock nut
3. Pivot bolts
4. Drill holes
5. Hexagonal screw
6. Wall plugs
7. Screws
Mounting the wall bracket
Required tools
■ Drill
To Next Page
Loading...
Need help?
General