To Next PageTo Next PageWhat to do if my Cub Cadet Snow Blower won't propel itself?
If your Cub Cadet Snow Blower won't move: * Adjust the drive control cable, referring to the Maintenance & Adjustments section. * Replace a loose or damaged drive belt, referring to the Service section. * Replace a worn friction wheel, referring to the Service section.
How to fix a Cub Cadet Snow Blower chute that won't rotate?
If the chute on your Cub Cadet Snow Blower doesn't rotate easily, disassemble the chute control and reassemble it as directed in the Assembly & Set-up section.
General| Transmission | Hydrostatic |
|---|---|
| Steering | Power steering |
| Turning Radius | 18 inches |
| Engine | Kohler |
| Drive | 2WD |
| Warranty | 3 years |
Read, understand, and follow all instructions before operating the machine.
Inspect the area, remove hazards, wear safety gear, and ensure proper setup.
Handle gasoline with extreme care due to flammability and explosive vapors.
Test and adjust drive control cable and shift lever for proper engagement and movement.
Test auger control cable slack and adjust if necessary to ensure proper disengagement.
Refer to engine manual for starting and stopping procedures.
Move shift lever, then squeeze drive control to move; release to stop.
Squeeze auger control to engage; squeeze drive control to move.
Shear pins protect auger/gearbox from damage; replace with OEM parts if sheared.
Disengage controls, stop engine, disconnect spark plug wire before servicing.
Steps to remove chute crank assembly and plastic belt cover before belt replacement.
Common causes and remedies for engine starting problems.
