Troubleshooting
8
17
Problem Cause Remedy
Tines do not engage 1. Foreign object lodged in tines
2. Tine clevis pin(s) missing
3. Pulley and idler not in correct adjustment
4. Not shifting properly
5. Control cable not adjusted properly
6. Belt worn and/or stretched
1. Dislodge foreign object
2. Replace tine clevis pin(s)
3. Take tiller to authorized service dealer
4. Refer to the Controls & Features Section for
proper shifting procedures
5. Adjust control cable
6. Replace belt
Tines skip over ground 1. Improper rotation. 1. Forward rotation should only be used on soil
that has already been tilled, not on virgin soil.
Wheels do not engage 1. Clevis pin missing
2. Tiller is not being shifted properly
3. Control cable not adjusted properly
4. Belt worn and/or stretched
1. Replace clevis pin
2. Refer to Controls & Features Section for
proper shifting procedures
3. Adjust control cable
4. Replace belt
To Next Page
Loading...
