24 25
TIPS
• If there are additional zones in your lawn, place the Base
Station within the largest zone
• In a at and shady spot to extend battery life
• Keep a distance of at least 1 m / 3 feet from sprinkler heads
to avoid hitting the mower directly and damaging its internal
components
Consideration C
Make sure the ground is even and
at, and that there are no slopes
• Have the mower’s package nearby.
• Be sure to cut your grass with your old mower one last time
before you start wiring. This will make inserting pegs easier and
help ensure that the mower doesn’t cut the wire.
WHAT
YOU’LL
NEED
• Hammer
• Small, at screwdriver
• Combination pliers
Lay the perimeter wire (“virtual boundary”), which
denes the working area for the mower.
Lay
the Wire
TIPS
Soft Obstacles
Soft obstacles are ower beds,
ponds or small trees. They need to
be protected by creating Perimeter
Islands.
OBSTACLES
Now you’re ready to install the Perimeter Wire.
Let’s take it step by step.
First things rst: obstacles and slopes
Before you put a single peg into the ground, take note of any
obstacles or slopes.
To Next Page
Loading...
