Cub Cadet XR2 1000 - What if you prefer an External Base?; B. Maintain Proper Distance

28 29
Min. 10 cm (4”)
10 cm (4”)
4-5 cm
10 cm (4”)
Main Zone
What if you prefer an External Base?
Please see the drawings below for proper instructions
on how to lay the perimeter wire in this case.
TIP
Note the straight wire section after the Base.
A helpful video
is available
online
B. Maintain Proper Distance
The Perimeter Wire is secured to the ground by the pegs supplied with
the product. Use the RoboRuler to determine the distances you should
leave between the Perimeter Wire and the lawn’s edge and obstacles.
• Insert pegs every few meters / feet and at corners. At this
early stage, set a minimal number of pegs. You will insert all
necessary pegs later.
• Pull the wire tight while hammering the pegs to their nal
depth in the ground.
• Take care not to damage irrigation pipes.
TIPS