Cub Cadet XT2-LX42 User Manual

Troubleshooting
8
30
Problem Cause Remedy
Excessive vibration 1. Cutting blade loose.
2. Damaged, unbalanced or bent cutting blade.
1. Tighten blade and spindle.
2. Replace blade.
Uneven cut 1. Deck not leveled properly.
2. Dull or damaged blade.
3. Uneven tire pressure.
1. Perform side-to-side deck adjustment.
2. Sharpen or replace blade.
3. Check and correct tire pressure in all four
tires.

Cub Cadet XT2-LX42 Specifications

General

Engine Brand	Kohler
Horsepower	22 HP
Transmission	Hydrostatic
Cutting Width	42 inches
Fuel Capacity	3 gallons
Turning Radius	16 inches
Deck Material	13-Gauge Steel
Engine Type	4-cycle
Engine Size	725cc
Engine Cylinders	2
Deck Size	42 inches
Blade Engagement	Electric PTO
Fuel Tank Capacity	3 gallons
Cutting Height	1-4 in
Front Tires	15 x 6 in
Warranty	3-year
Rear Tires	20 x 8 in