EasyManuals Logo

Cub Cadet ZT1 42E User Manual

Cub Cadet ZT1 42E
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
OPERATION
Operating the PTO
To operate the PTO (Blades ON/OFF) proceed as follows:
Press the PTO button for one second. When activated the yellow
indicator light under the PTO button is ON (Blades ON). Press the
PTO button again for one second, green indicator light is OFF
(Blades OFF).
Mowing
WARNING
To help avoid blade contact or a thrown object injury,
keep bystanders, helpers, children and pets at least 75
feet (23 meters) from the tractor while it is in operation.
Keep bystanders, children and pets inside during
operation. Stop tractor if anyone enters the area.
Plan your mowing pattern to avoid discharge of materials
toward roads, sidewalks, bystanders and the like. Also,
avoid discharging material against a wall or obstruction
which may cause discharged material to ricochet back
toward the operator.
The following information will be helpful when using the cutting
deck with your tractor:
1. Do not mow or drive at high ground speed, especially if a
mulch kit or grass collector is installed.
2. For best results it is recommended that the first two laps be
cut clockwise with the discharge facing towards the center
of your lawn. After the first two laps, reverse the direction to
discharge to the outside for the balance of cutting. This will
give a better appearance to the lawn.
3. Do not cut the grass too short. Short grass invites weed
growth and yellows quickly in dry weather.
4. Under heavier conditions it may be necessary to go back over
the cut area a second time to get a clean cut.
5. Do NOT attempt to mow heavy brush and weeds and grass
taller than 10” (25.4 cm). Your tractor is designed to mow
lawns, NOT clear brush.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cub Cadet ZT1 42E and is the answer not in the manual?

Cub Cadet ZT1 42E Specifications

General IconGeneral
ModelZT1 42E
Cutting Width42 inches
Deck Material13-gauge steel
Charging Time4 hours
Drive SystemRear-Wheel Drive
Blades2
Forward Speed7 mph
Reverse Speed3.5 mph
TransmissionElectric
Battery56V / 60 Ah / 3000 Wh
Cutting Height1.5 - 4.5 inches

Related product manuals