Cub Cadet ZT1 42E - User Manual

Safe Operation Practices • Assembly • Operation • Service And Maintenance
OperatOr’s Manual
Form No. 769-25913A
(January 20, 2021)
Battery-Powered Lithium-Ion Zero-Turn
Tractor
Lapbar Steering & Drive Controls
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are
applicable to all models and the model depicted may differ from yours.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this
machine.
Failure to comply with these instructions may result in personal injury - SAVE THESE INSTRUCTIONS.
WARNING
CALIFORNIA PROPOSITION 65
Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Record Product Information
Before setting up and operating your
new tractor, please locate the model
plate on the equipment and record
the information in the provided
area to the right. You can locate the
model plate by lifting up the seat
and looking under the seat pan. This
information will be necessary, should
you seek technical support via our
web site, Customer Support, or with a
local authorized service center.
Model Number
3 4 A 2 C S
Serial Number
English ......................................................................................................................................Page 2
Spanish (Español) ....................................................................................................................Page 31

Summary

Safe Operation Practices

Preparation and Pre-Operation Checks

Steps for inspecting the area and preparing the tractor before operation.

Safe Operating Procedures

Child Safety Precautions

Critical safety instructions to prevent child-related accidents and injuries.

Slope and Terrain Safety

Safe practices for operating the tractor on slopes and varied terrain.

Electrical and Battery Safety

Assembly and Setup

Operation

Tractor Controls and Indicators

Starting and Driving the Tractor

Step-by-step instructions for starting the tractor and basic driving maneuvers.

Turning and Maneuvering Techniques

PTO Engagement and Mowing

Engaging the PTO and best practices for efficient and safe mowing.

Service and Maintenance

Component Maintenance and Adjustments

Deck Leveling and Wheel Setup

Troubleshooting and Diagnostics

Resolving common problems, understanding LCD messages, and fault codes.

Cub Cadet ZT1 42E Specifications

General

Model	ZT1 42E
Cutting Width	42 inches
Deck Material	13-gauge steel
Charging Time	4 hours
Drive System	Rear-Wheel Drive
Blades	2
Forward Speed	7 mph
Reverse Speed	3.5 mph
Transmission	Electric
Battery	56V / 60 Ah / 3000 Wh
Cutting Height	1.5 - 4.5 inches