To Next PageTo Next Page
Need help?Do you have a question about the Cuenod NC9 GX207/8 and is the answer not in the manual?
Details warranty conditions, safety regulations, and installation requirements for burner operation.
Lists relevant French and international regulations applicable to gas installations and safety.
Provides technical specifications, burner characteristics, and performance data.
Instructions for mounting the burner onto the boiler, including flange and blast tube fitting.
Guidelines for connecting the gas supply to the burner assembly and valve, with safety checks.
Details on electrical connections, wiring, conductor sections, and protection requirements.
Essential pre-start checks, including voltage, gas, flue, and preliminary settings.
Details on burner components, settings, and combustion air adjustment.
Components and functions of the gas manifold assembly, including valves and pressure controls.
Procedures for setting the gas valve, pressure controller, and incremental advance.
Explanation of the SG 513 control unit's operating diagram and fault codes.
Steps for performing cycle tests, ignition, combustion analysis, and safety checks.
Procedures for cleaning the main board, air box, volute, and firing head.
Instructions for safely disassembling and reassembling the blast tube.
Guidance on gas valve maintenance and checking electrical connections.
Guides for identifying burner defects, their causes, and recommended remedies.
Detailed list of burner components with article numbers for replacement.
Introduction to the electrical and hydraulic schematics for the burner.
Detailed wiring diagram showing power supply, safety devices, and burner components.
Continuation of the electrical schematic, detailing gas and burner circuits.
Final part of the electrical schematic, illustrating air, gas, and control unit connections.
General
