Why Cuenod Burner does not start after thermostatic closure?
If your Cuenod burner doesn't start after the thermostatic closure and the unit shows no fault, it could be due to a low or missing power supply, so check the voltage source. Alternatively, the unit itself may be defective, requiring a replacement.
What to do if Cuenod Burner starts up briefly when the power supply is switched on?
If the Cuenod burner starts briefly when you switch on the power supply, the unit might be manually locked. In this case, you should unlock the unit.
Exploded view of components with position numbers for identification.
Detailed descriptions and designations of spare parts across multiple languages.
Legend explaining symbols and categories used in the spare parts list.
Main circuit diagram showing electrical and hydraulic connections for the burner.
Continuation of the circuit diagram, detailing options and connections.
Final part of the circuit diagram, listing components and their functions.
To Next Page
General
