11
B Fitting & Removing the Large and Small Pushers
The pusher assembly has two parts:
Large Pusher
Insert the large pusher into the feed tube opening, ensuring the metal rod of the pusher
connects with the interlock system in the work bowl lid. Without this connection the
motor will not function.
To remove the pusher, simply lift up and away.
The large pusher can be locked into place when using the small pusher or processing
heavy loads. To lock simply pull out the interlock system on the lid as indicated above
Small Pusher
Secured with a snap-fi t, the small pusher fi ts inside the large pusher to accommodate
ingredients of all sizes.
To Next Page
Loading...
