Cuisinart ICE50BCU - Instructions for Use; Assembling the Cuisinart Ice Cream Professional

8
Instructions for Use
Before  rst use, clean the lid, mixing bowl and mixing paddle in warm soapy water.
N.B. Do not clean any of the part with abrasive cleaners, hard implements or in the dishwasher.
A Assembling the Ice Cream Professional
ß Take the motor arm and place smooth side face down on a  at surface so that the holes are visible on
top.
ß Align the  at end of the stem with the cut out in the motor arm, and push into position.
ß Place the domed side of the lid face down over the top of the stem until resting on the motor arm with
the opening. Align the plastic ridge on the top of the lid with the bracket on the edge of the motor arm.
Push the lid back until locked into place. This will secure the lid to the motor arm.
ß Align the mixing paddle with the top of the stem and push into place.
N.B. There should be a 1cm gap between the bottom of the paddle and the bottom of the stem.