System Overview
The Culligan Ascent™ CT Bottleless Cooler comes equipped with features one can expect from
a state-of-the-art Bottleless Cooler from Culligan. Highlights include:
- Ergonomic spigots for easy dispense of hot and cold water
- Hot water safety
- Touch free dispensing
- Glass upper front panel for a high-end contemporary design
- 11.75” dispense area
- Cold water dispense pump provides flow at 2.0 lpm, faster and more consistent water
flow
- Air filter to help keep airborne particles from the water in the reservoirs
- In tank LED UV light
- Leak stop and leak detection
The Ascent™ CT is available in two filter configurations:
1.
Ascent CT-RO: This Ascent CT-RO model filters your water through a series of filters and a RO
membrane to reduce contaminants. These are:
A. 10 micron sediment filter (P/N BFC-SED)
B. Pre-Carbon GAC filter (P/N BFC-PRE)
C. 80 gallon per day RO membrane (P/N BFC-RO80)
D. Mineral filter to improve taste and increase alkalinity and electrolytes. (P/N
BFC-PH)
E. GAC post filter with 1 micron mesh (P/N BFC-POST)
2.
Ascent CT-M: This Ascent CT-M model filters your water through the following filters:
A. 10 micron sediment filter (P/N BFC-SED)
B. Pre-Carbon GAC filter (P/N BFC-PRE)
C. 1 micron carbon block with lead reduction rating (P/N BFC-LR) **NOTE: a 0.5 gpm flow
regulator must be used in order to comply with the lead reduction rating.
To Next Page