Culligan M2 Series User Manual

30 Culligan® Series M2 Reverse Osmosis
30 Cat. No. 01023095
RUNNING
JAN-01-12 12:01P
4. Press to save the settings and return to the home screen.
GBE-Wireless Communication Setup
Now set up the RO controller to communicate with the wireless remote.
RUNNING
JAN-01-12 12:01P
1. From the default home screen, press . The screen displays the main menu.
1) GO TO RUNNING
2) GO TO OFFLINE
3) INFORMATION
>4) SETUP
2. Press to scroll to 4) SETUP.
3. Press to select the SETUP menu.
2) LANGUAGE
3) POWERON MODE
4) FLUSH MODES
>5) ACCESSORIES
4. Press to select 5)ACCESSORIES. The screen displays the ac-
cessories menu.
>1) WIRELESS REM
2) MODEM
3) FLOW METERS
4) SWITCH INPTS
5. Press to select 1)WIRELESS REM. The screen displays the accessories menu.
REMOTE DISPLAY
NOT INSTALLED
6. Press or and then to change the state to INSTALLED.
CHANNEL #
>1
7. Press or and then to select the channel number of the control valve.
The CHANNEL # for the RO controller must be the same as the CHANNEL # for
the Remote Display.
RF FREQUENCY
915 Mhz
8. Use this setting to select the correct radio frequency. Do not change the RF fre-
quency for North America installations..
RUNNING
JAN-01-12 12:01P
9. Press to save the settings and return to the home screen.

Culligan M2 Series Specifications

General

Brand	Culligan
Model	M2 Series
Category	Water Filtration Systems
Language	English