Cupra ATECA 2022 - Page 190

188
Parking and manoeuvring
1
2
3
●
Reverse until the continuous ParkPilot sig-
nal sounds; OR: reverse until the indication
to move forward appears on the instrument
panel display ›››Fig.134 or ›››Fig.135
; OR: reverse until the Park Assist fin-
ished message appears on the instrument
cluster display. The progress bar
6
indicates
the distance to cover.
●
Press the brake pedal until the parking as-
sist system completes the steering wheel turns;
OR: until the symbol goes out on the instru-
ment panel screen.
●
Select rst gear.
●
Move forward until the continuous ParkPilot
signal sounds; OR: move forward until the re-
verse indication appears on the instrument
panel display. The Park Assist system steers the
vehicle forward and back until it centres it in
the space ›››Fig.134
or ›››Fig.135 .
●
For best results, wait at the end of each ma-
noeuvre until the Park Assist system has n-
ished turning the steering wheel. The parking
manoeuvre ends when a corresponding mes-
sage is displayed on the instrument panel and,
in some cases, an acoustic signal sounds.
Progress bars
The progress bar ›››Fig.134
6
and
›››Fig.135
6
on the instrument cluster dis-
play shows the relative distance to be covered
as a symbol. The greater the distance, the
fuller the progress bar. When driving forward,
the content of the progress bar decreases up-
wards, and when reversing, it decreases down-
wards.
Note
If the manoeuvre is terminated prematurely
during parking, the result may not be the
best.
Leaving a parking space with the
parking assist system (only for par-
allel parking)
Fig.136 On the instrument panel display:
driving o from perpendicular parking.
Your vehicle in reverse gear
Message giving the proposed manoeuvre
to exit the parking space
Progress bar to indicate the distance left to
cover
Leaving a parking space (parallel parking)
The necessary conditions to exit a park-
ing space with Park Assist have to be met
›››page183.
●
Press the button. A control lamp on the
button lights up when the system is switched
on.
●
Turn on the corresponding turn signal to-
wards the road you will enter when exiting the
parking space.
●
Select reverse gear.
●
Let go of the steering wheel. Please note the
following message:
Automatic steering enabled Pay at-
tention to your surroundings.
While keeping watch around you, carefully
start accelerating up to no more than 7 km/h
(4mph). When exiting the parking space, the
system only takes charge of the steering. You,
as the driver, have to accelerate, engage the
clutch if necessary, change gears and brake.
●
Reverse until the continuous ParkPilot signal
sounds; OR: reverse until the instrument panel
display shows the forward indication. The pro-
gress bar ›››Fig.136
3
indicates the distance
to cover.
●
Press the brake pedal until the parking as-
sist system completes the steering wheel turns;
OR: press the brake pedal until the symbol
goes out on the instrument panel screen.