Cupra ATECA 2022 - Page 211

Data transmissions
209
WLAN access point
no icon
Personal
No location. Only the vehicle
data and user data are used for
services.
Incognito
Maximum privacy. Your serv-
ices are disabled. Only services
required for legal reasons use
data.
Setting options are not available in all markets
or in all vehicle models.
Connectivity status indication
The following symbols indicate the respective
data transmission status in the infotainment
system.
Symbol white: full connectivity, all serv-
ices active
Symbol grey: limited connectivity, some
services may not be available.
No connectivity, no services available.
WLAN access point
Introduction
✓ Not available on vehicles without CUPRA CON-
NECT and without navigation
The infotainment system can be used to share
a WLAN connection with up to 8 devices
›››page209, Conguration for sharing a
connection over WLAN.
The infotainment system can also use the
WLAN hotspot of an external device to provide
Internet to the devices connected to the hot-
spot (WLAN client) ›››page210.
Note
●
Data transmission may incur charges. Due
to the high volume of data exchanged, CU-
PRA recommends the use of a at rate tar-
i for data transmission. Mobile phone oper-
ators can provide the relevant information.
You can also purchase data plans for your ve-
hicle on the Cubic website:
https://seat.cubictelecom.com/es/
●
Exchanging data packages and purchasing
them from third parties may generate ad-
ditional costs, depending on your mobile
phone rate, particularly if you are abroad (for
example, roaming rates).
Conguration for sharing a con-
nection over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the HOME > button.
●
Activate the wireless network. To do this,
press the function button Wi-Fi > Infotain-
ment system as hotspot.
●
Activate the wireless network (WLAN) on the
device that is to be connected. If necessary,
refer to the manufacturer’s instruction manual.
●
Activate the mobile device assignment in
the infotainment system. To do this, press the
function button Use as hotspot and check the
checkbox.
●
Enter and conrm the network key displayed
on the device.
The following adjustments can also be made in
the Infotainment system as hotspot menu:
●
Security level: WPA2 encryption automati-
cally generates a network key.
●
Network key: Network key automatically
generated. Press the function button to man-
ually change the network key. The network key
must have a minimum of 8 characters and a
maximum of 63.
●
SSID: WLAN Network name (maximum of 32
characters).
The wireless (WLAN) connection is estab-
lished. To complete the connection, it may be
necessary to enter other data into the device.
Repeat this process to connect other devices.
There is also the option of scanning the QR
code by connecting the device directly to the
infotainment system’s Wi-Fi network without
having to enter the password: select Settings
> Wi-Fi > Quick connection to infotainment
system.
An additional feature is that the infotainment
system can provide data to any device over
WPS (Hotspot mode) in the same menu as the
QR code.