1)
Not available in all markets.
WARNING
The smart technology of the driver alert sys-
tem cannot overcome the limits imposed by
the laws of physics and only works within
the limits of the system. Do not let the com-
fort aorded by the Fatigue detection system
tempt you into taking any risks when driving.
Take regular breaks, suicient in length when
making long journeys.
●
The driver always assumes the responsibil-
ity of driving to their full capacity.
●
Never drive if you are tired.
●
The system does not detect the tiredness
of the driver in all circumstances. Consult
the information in the section ›››page20,
Conditions of operation.
●
In some situations, the system may incor-
rectly interpret an intended driving manoeu-
vre as driver tiredness.
●
No warning is given in the event of the ef-
fect called microsleep!
●
Please observe the indications on the in-
strument panel and act as is necessary.
Note
●
Fatigue detection has been developed for
driving on motorways and well paved roads
only.
●
If there is a fault in the system, have it
checked by a specialised workshop.
Road signs detection system
1)
Fig.6 On the instrument panel display:
examples of speed limits or overtaking
prohibitions with their respective additional
signs.
The dynamic road signs display records stand-
ard road signs using a camera tted to the base
of the interior mirror, and provides information
about speed limits, overtaking prohibitions and
warning signs that it recognises.
Within its limitations, the system also displays
a additional sign to indicate aspects such as
temporary prohibitions. Even on routes with-
out signs, the system can, if necessary, display
the applicable speed limits.
The dynamic road sign display system is activa-
ted whenever the ignition is switched on.
The traic sign detection system does not
work in all countries. Keep this in mind when
travelling abroad.
Shown on the display
In Germany, on motorways and vehicle roads,
besides speed limits and overtaking provisions
the system also displays the end of prohibition
signs. The valid speed limit at the time in other
countries is always shown.
The road signs detected by the system are
displayed on the instrument cluster display
›››Fig.6 and, depending on the navigation
system tted in the vehicle, in the infotainment
system as well .
Road sign detection system messages:
There are no road signs available
●
The system is in its start-up phase.
●
OR: the camera has not recognized any
mandatory or prohibitive signs.
To Next Page
