Cupra ATECA 2022 - Page 86

84
Opening and closing
Operating the sunroof
Fig.61 On the interior roof lining: sunroof
button.
The sun blind automatically opens along with
the sunroof if completely closed or if in front
of the sunroof. The sun blind remains in the
previous position and does not automatically
close with the sunroof. The sun blind can only
be closed completely once the sunroof has
been closed.
The ›››Fig.61button has two levels. The
rst level switches the sunroof to the tilted po-
sition, opening or closing it fully or partially.
On the second level, the sunroof automatically
moves to the corresponding nal position after
briey pressing the button. Activating the but-
ton again stops the automatic function.
Adjusting the tilt position of the sunroof
●
Press the rear part of the button
B
to the
rst level.
●
Automatic function: briey press the rear
part of button
B
to the second level.
Closing the sunroof from a tilted position
●
Press the front part of the button
A
to the
rst level.
●
Automatic function: briey press the front
part of the button
A
to the second level.
Stopping the automatic operation by adjust-
ing the tilted position of the sunroof or by
closing the sunroof
●
Press button
A
or
B
again.
Opening the sunroof
●
Press button
C
backwards to the rst level.
●
Automatic function to the convenience posi-
tion: briey press button
C
backwards to the
second level.
Closing the sunroof
●
Press button
D
forwards to the rst level.
●
Automatic function: briey press button
D
forwards to the second level.
Stopping the automatic operation during
the opening or closing
●
Press button
C
or
D
again.
Convenience function to open or
close the sunroof
Fig.62 Door handle: sensor surface.
The sunroof can be opened and closed with
the convenience function, just like the win-
dows.
Using the door lock
●
Hold the key in the door lock of the driver
door in either the unlocking or locking position
to open or close the roof in the tilted position.
Release the key to interrupt this function.