●
Automatic operation: briey press the button
1
(open) or
2
(close) up to the second level.
Pressing the button again stops the automatic
function.
Anti-trap function of the sunshade blind
The anti-trap function can reduce the risk of
injury when closing the sunshade blind ››› .
If the blind encounters resistance or an obsta-
cle when closing, it will reopen immediately.
●
Check why the blind did not close.
●
Try to close the blind again.
●
If the blind still cannot be closed due to an
obstacle or resistance, it will reopen immedi-
ately. Once open, it can be closed for a short
space of time without the anti-trap function.
●
If it is still not possible to close the blind,
close it without the anti-trap function.
Closing the sunshade blind without the anti-
trap function
●
Try to close the blind again.
●
If it still cannot be closed, within 5 seconds
press the button ›››Fig.63
2
until the blind
closes fully. The blind closes without the in-
tervention of the anti-trap function!
●
If it is still not possible to close the blind, visit
a specialised workshop.
WARNING
Closing the sun blind without the anti-trap
function can cause serious injury.
●
Always close the blind with care.
●
Do not allow anyone to remain in the blind
travel area, particularly when closing without
the anti-trap function.
●
The anti-trap function does not prevent
ngers or other parts of the body from be-
coming trapped against the roof frame and
injuries occurring.
Note
When the sunroof is open, the electric sun
blind can only be closed to the front edge of
the sunroof.
To Next Page
Loading...
