Seats and head restraints
Fig.73 Rear head restraint: removal.
Removing the front head restraints
●
Lower the head restraint if necessary.
●
To unlock it, look for the rabbet on the bot-
tom of the backrest and press in the direction
of the arrow ›››Fig.72
1
.
●
Remove the head restraint in the direction of
the arrow
2
.
Fitting the front head restraints
●
Place the head restraint in the correct posi-
tion on the guides of the corresponding back-
rest and insert it.
●
Press the head restraint downwards until the
bars lock.
●
Adjust the head restraint according to the in-
structions on the correct position of the seat.
Removing the rear head restraints
To remove the head restraint, the correspond-
ing backrest must be partially folded forward.
●
Unlock the backrest ›››page90.
●
Move the head restraint upwards until it ar-
rives to the top.
●
Press button ›››Fig.73
1
, while simultane-
ously pressing on the safety hole
2
with a at
screwdriver a maximum of 5 mm wide, and re-
move the headrest.
●
Move the backrest until it engages properly
››› in Folding down and raising the rear
seat backrest on page91.
Fitting the rear head restraints
To mount the external head restraints, the cor-
responding backrest must be partially folded
forward.
●
Unlock the backrest ›››page90.
●
Insert the head restraint bars into the guides
until they perceptibly engage. It should not be
possible to remove the head restraint from the
backrest.
●
Move the backrest until it engages properly
››› in Folding down and raising the rear
seat backrest on page91.
WARNING
Remove the rear headrests only when it is
necessary to t a child seat. After removing a
child seat, ret the headrest immediately.
Seat functions
Memory function
Fig.74 On the outer side of the driver
seat: memory buttons.
Memory buttons
The memory buttons can be used to save and
turn on settings for the driver seat and the ex-
terior mirrors.
The settings will also be saved in the key or in
the user of the online services, depending on
the version.
To Next Page
Loading...
