4.10. Stop the treatment
When you have activated t
he treatment timer,you can press the [M]
button or the [▼] button to control stop the treatment.
Caution:
Default state, if the button is locked, you can press only one of
the [▼] buttons to unlock, and then press the [M] button or the
[▼] button to control stop the treatment.
4.11. Turn OFF
PRESS [ ] button and HOLD for approximately 3 seconds to turn
OFF the device.
Caution:
1) If there is no operation in the panel for 2 minutes in the
waiting state, the device turns off automatically.
2) In shutdown state, keep pressing the channel 2 [▼] first,
and then press [ ] button at the same to restore factory
parameter settings
4.12. Low battery indicator
When the low power indicator flashes, the device will be turns off
automatically, the battery should be replaced with a new one as
soon as possible. However, the unit may continue to operate for an
extended period of time depending on the setting and intensity
level.
To Next Page
Loading...
