)7 Always use the electrodes with the requirements of the
IEC/EN60601-1, ISO10993-1/-5/-10 and IEC/ EN60601-1-2,
such as with CE mark, or are legally marketed in the US
under 510(K) procedure.
6.4 Cleaning the Electrode's cords
Clean the electrode cords by wiping them with a damp cloth. Coating
them lightly with talcum powder will reduce tangles and prolong the
life.
6.5 Maintenance
1) Maintenance and all repairs should only be carried out by an
authorized agency. The manufacturer will not be held
responsible for the results of maintenance or repairs by
unauthorized persons.
2) The user must not attempt any repairs to the device or
accessories. Please contact the retailer for repair.
3) Opening of the equipment by unauthorized agencies is not
allowed and will terminate any claim to warranty.
4) Check the unit before each use for signs of wear and/or damage.
Replace worn items as required.
To Next Page
Loading...
