INSTALLATION
12
• You may use the U-shaped drain hose
holder to secure your drain hose and to
avoid bending it.
U-shaped drain hose
holder
water drain hose
• Secure the water drain hose to the waste
pipe to avoid it coming o during the
washing process.
Before connecting to the waste
pipe, make sure to check the
waste pipe and remove any
stopper or blockage inside,
otherwise the unit may not be
able to expel the waste water
properly.
• The waste pipe must only be connected to the foul
drains and not the surface water drainage system.
• The water drain hose should be placed between 40
cm and 100 cm from the oor level and must not be
extended, otherwise the unit may not be able to expel
the waste water properly.
• Please close the hydrant after use.
CDW60W_B_S16/A_IB_RC_171116_grace.indd 12 16/11/17 6:08 pm
To Next Page
Loading...
