INSTALLATION
9
1. Please ensure the dishwasher is installed
by a qualied technician. Refer to the tools
required.
Location
When selecting a position for your dishwasher
you should make sure the installation surface
is at and rm, and the room is well ventilated.
Avoid locating your dishwasher near a heat
source, eg. cooker, boiler or radiator. Extreme
cold ambient temperatures may also cause
the appliance not to perform properly. This
dishwasher is not designed for use in a garage
or outdoors.
Do not cover the dishwasher. When installing,
ensure that free space is left at the sides.
2. Ensure there is clearance each side of the
unit to allow slight sideways movement for
servicing when required. Good levelling is
essential for correct closure and sealing of
the door. When the unit is correctly levelled,
the door should not catch the inner liner on
either side of the cabinet. The adjustable
feet may be loosened or tightened in order
to obtain the optimum levelling of the unit.
The gure outlines the minimum
dimensions required to accommodate the
dishwasher within tted kitchen furniture
units.
3030
level
level
level
level
610
845
850
650
min.100
80
603
598
units in mm
All parts removed must be saved to
do the reinstallation in the future.
Ensure the dishwasher is unplugged
and empty. We recommend that 2
people handle the dishwasher during
installation.
CDW60W_B_S16/A_IB_RC_171116_grace.indd 9 16/11/17 6:08 pm
To Next Page
Loading...
