Curt Manufacturing 11435 - User Manual

MAKE: STYLE:
45
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com
WEIGHT CARRYING:
INSTALLATION TIPS:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY:
MODERATE
EASY MODERATE CHALLENGING
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
Safety glasses should be
worn at all times while
installing this product
.
YEARS:
2016-CURRENT
MAZDA
MODEL:
MX-5 MIATA
CONVERTIBLE
2,000
200
TRAILER WEIGHT:
TONGUE WEIGHT:
11435 INSTALLATION INSTRUCTIONS
LBS.
LBS.
WARNING:
WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
90
MIN.
MIN.
PRO INSTALL TIME:
NOVICE INSTALL TIME:
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
SCAN FOR
MORE INFO
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product
voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.
3/24/2016
SOCKET
10mm
11/16"
7/16"
SOCKET
EXTENSION
3"
RATCHET
TORQUE
WRENCH
DIE GRINDER
SAFETY
GLASSES
PART REMOVAL
ENLARGE ACCESS HOLE
FISHWIRE HARDWARE
LOWER EXHAUST
REPLACE FASCIA SUPPORT

Summary

Installation Overview and Safety

Installation Tips

Tips for a successful installation, including reading instructions thoroughly and considering two-person installation.

Weight Capacity and Warnings

Crucial information on weight carrying limits and essential safety warnings for towing and installation.

Installation Walkthrough

Parts List

Comprehensive list of all parts and hardware required for the hitch installation process.

Step 1: Lower Exhaust

Procedure to detach exhaust hangers to lower the vehicle's exhaust system.

Step 2: Remove Fascia Tab Supports

Instructions for removing plastic fascia tab supports from the vehicle's frame rails.

Step 3: Enlarge Mounting Hole

Enlarging rear mounting holes on the frame rails to fit spacers and carriage bolts.

Step 4: Fishwire Hardware

Using the fishwire technique to guide spacers and bolts through frame rails.

Step 5: Secure Hitch

Raising the hitch into position and securing it with hex flange nuts.

Step 6: Attach Brackets & Fascia Tabs

Attaching side brackets to the hitch and fascia tabs to the brackets.

Step 7: Torque Fasteners

Torquing all installed hardware to the specified values for safety and durability.

Step 8: Reattach Exhaust

Reattaching all exhaust hangers after the hitch installation is complete.

Towing Safety and Information

Weight Definitions

Explanation of Gross Trailer Weight (GTW), Tongue Weight (TW), and Weight Carrying (WC).

Towing Capacity Guidelines

Information on safe towing limits, weight distribution, and sway control.

Safety Chain Requirements

Guidelines and minimum breaking force requirements for safety chains.

Electrical System Identification

Wiring color identification for trailer lights and electrical brake systems.

Curt Manufacturing 11435 Specifications

General

Brand	Curt Manufacturing
Part Number	11435
Weight Capacity	3500 lbs
Tongue Weight	350 lbs
Material	Steel
Product Type	Trailer Hitch
Load Capacity	3500 lbs
Receiver Size	1-1/4 inch
Finish	Black Powder Coat
Hitch Receiver Size	1-1/4 inch