Curt Manufacturing 70001 - Unhooking the Towed Vehicle; Step 10: Preparation; Step 11: Disengaging Arms

CURTMFG.COM
•
NEED ASSISTANCE?
•
877.287.8 634
•
70001-INS-RA
•
PAGE 5
UNHOOKING THE TOWED VEHICLE
Step 10
For ease and safety when unhooking the
tow bar, park the towing and towed vehicles
on a level surface in a straight line.
Unhook the electrical and safety cables.
IMPORTANT: Any time you are hooking
up or unhooking the tow bar both
vehicles should be in park.
Step 11
Pull up on the arm latches
to disengage the arms.
CAUTIO N
When disengaging the arms, ensure you are in a
safe position from vehicle roll and pinch points.
Remove the lynch pins and pull out the
1/2" pins from the tow bar tabs and lugs.
While pulling up on the arm latches, retract
each arm until it hits an internal hard stop.
Place the 1/2" pins back into the tow bar lugs
and secure with the lynch pins, as shown.
Correct Incorrect