PAGE 2
This package includes:
(1) Brake control module with quick plug
(1) Mounting bracket
(6) Mounting bracket screws
(1) Quick reference card
One or more of the following may be needed to complete installation:
•
Brake control connection harness, supplied with the tow vehicle (if equipped)
•
CURT quick plug adapter harness - custom connector for specific vehicles.
See catalog for availability
•
CURT part# 51515 / 51516 - male quick plug with pigtails
•
CURT part# 51500 - brake control wiring kit
Important Information
Read and follow installation and setup instructions carefully. Failure to do so could
result in damage to the brake control unit, no trailer brakes or poor brake performance.
Disconnect the electrical plug between the trailer and tow vehicle before testing a
breakaway switch. Failure to disconnect may damage the brake control unit.
Avoid mounting the brake control module near a CB radio or other RF transmitter.
WARNING: The brake control unit must be mounted firmly in place.
Failure to do so could lead to improper operation and/or brake failure.
To Next Page
Loading...
Need help?
General
