"&+*7<26758(7.326
This instrument was manufactured and tested
according to the applicable technical standards. It complies with
all the safety regulations as shipped from the factory.
Installation and startup must be performed by skilled personnel.
Failure to install and operate the unit in accordance with these
instructions may result in damage or injury.
If safe operation of the instrument can no longer be ensured,
stop and secure it against accidental operation.
If instrument failure or malfunction may cause personal injury or
material damage, use additional safety measures such as limit
switches, guards, etc.
Read the Operating Instructions carefully before startup.
Note the safety instructions marked with this
warning symbol in this manual.
%&55&27<
Curtis Instruments’ products and/or components are guaran-
teed against defects in workmanship and material for a period
of two years, or as defined in the individual product literature,
from date of shipment from our factory, when applied in a prop-
er application within specified ratings. This guarantee is limited
to repair or replacement F.O.B. our factory. There is no further
warranty or implied representation, guarantee, promise or
agreement as to any Curtis Instruments product and/or compo-
nent. Curtis Instruments, Inc., cannot assume responsibility or
accept invoices for unauthorized repairs to its products and/or
components, even though defective. In no case will Curtis
Instruments’ responsibility extend to products, components or
equipment not of its manufacture. Under no circumstances
shall Curtis Instruments, Inc., be liable for any special or con-
sequential damages or loss of profits or other damages.
Returned goods will not be accepted unless identified by a
Curtis Return Material Authorization (RMA).
All specifications are subject to
change without notice.
To Previous Page
Loading...
