Curtis CAFE0AP10A000 - Powering Up the Brewer

INSTALLATION INSTRUCTIONS II5
CAFE, INSTALLATION INSTRUCTIONS 121217B
Powering Up the Brewer
6 Connect the power cord to the electrical outlet.
7 Make sure that the circuit breaker supplying power to the
brewer is on.
8 Some brewers are equipped with a main power switch
on the back or front of the unit. Turn it to the ON position.
9 Depending on the water temperature and the electrical
TQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZSFRVJSFTUP
minutes to reach operating temperature. When the water
has heated, the READY TO BREW light will come on.
Power Switch (some units)
WARNING: Connect the power cords only to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cords, have it upgraded by a licensed electrician.
Do not modify the power plug. Do not use an
extension cord. Do not use a power cord/plug that is
damaged.
IMPORTANT: When operating the brewer at
FMFWBUJPOTIJHIFSUIBOGFFUNFUFST
IBWFBRVBMJmFEJOTUBMMFSBEKVTUUIFUIFSNPTUBU
inside the unit. See the PROGRAMMING GUIDE
section.