2.5 User Interface
Curtis enGage™ IV series instruments include 3 front panel buttons
for navigating through a menu system and programming the following
specific functions:
• Time Of Day Clock
• Battery Discharge Indicator
• Maintenance Intervals
• Settable Hour Meters
• Units - Metric / English Conversion
2.6 Configuring Your Panel
In order to configure an enGage™ IV panel, main power must be
applied (12 – 80VDC) to V+ and V- and the keyswitch must be active.
Following a power up sequence, the OEM logo (if applicable) will be
displayed. Once the start-up process is complete, the specified default
(normal) monitoring screen will appear.
2.6.1 enGage™ IV Menu System
The menu system is activated by pressing and holding the select
button for 3 seconds and then releasing when main menu appears.
2.6.2 Choosing Items Within Menu System
Items are selected within each menu utilizing the up / down
arrows on right side of panel. Once the desired item is chosen /
outlined, press the select button once and release. You will then see a
new set of choices for the previously selected item.
Curtis enGage™ IV Manual
page 5
To Next Page
Loading...