CLEANING INSTRUCTIONS CI3
GEM SATELLITE, CLEANING INSTRUCTIONS 051420B
Cleaning the Faucet Parts and Site Gauge
10 Wash - Wash the lid and all faucet and gauge
glass parts with the detergent solution. Clean
the inside of the gauge glass with a gauge brush
soaked with detergent solution.
11 Rinse - Thoroughly rinse all parts with clean,
warm water.
12 Sanitize - After rinsing, place the lid and all
faucet and gauge parts in a sink to be sanitized.
Immerse them in One-Pro cleaner mixed at a
ratio of 1 oz. (28 g.) per 5 gal. (19 L) of hot water
(122°F/50°C min.). Allow the parts to soak for 15
minutes.
13 Air Dry - Allow all parts to thoroughly air dry.
14 Reassemble - When dry, reassemble the handle/
bonnet. Hand tighten the handle/bonnet onto the
top of the faucet assembly. Reinstall the site gauge
(if applicable). If replacing a broken gauge glass,
carefully remove any traces of glass from the
silicone parts before inserting the new gauge glass
tube. Reinstall the lid.
WASH
RINSE
SANITIZE
To Next Page
Loading...
Need help?
General
