Need help?Do you have a question about the Curtis TLP and is the answer not in the manual?
General| Brand | Curtis |
|---|---|
| Model | TLP |
| Category | Coffee Maker |
| Language | English |
Highlights advanced features like pulse brew technology and programmable temperature control for optimal coffee flavor.
Details electrical and water supply requirements for different models, including voltage, wattage, and flow rate.
Provides physical dimensions and shipping information for various TLP models.
Outlines the default operational settings for brew temperature, pulse brew, and brew volume.
Explains standard safety symbols used throughout the manual to denote hazards and important information.
Provides critical safety guidelines for installation, operation, and maintenance, emphasizing qualified personnel and intended use.
Outlines specific safety requirements related to CE standards, including installation environment and user age restrictions.
Details essential requirements for safe and proper installation, including electrical, water supply, and filtration.
Specifies NSF International requirements for water connections, including disconnects and back-flow protection.
Instructions on how to properly level the brewer using its adjustable legs for stable operation.
Steps for connecting the water supply line to the brewer, including flushing the line.
Guidance on safely connecting the power cord to an appropriate electrical outlet.
Steps to safely power up the brewer by turning on the water supply and circuit breaker.
Details the process of the brewer heating water and indicating readiness, including elevation adjustments.
Guidance on adjusting brew temperature for optimal performance at higher elevations.
Instructions for performing an initial brew cycle to purge air and prime the system.
Step-by-step guide on how to brew coffee, from turning on the brewer to pressing the brew button.
Notes that the brewer is factory preset for optimal performance, with instructions to change settings via the Programming Guide.
Daily cleaning procedures for the brewer, including wiping surfaces, cleaning brew basket, and spray head.
Weekly cleaning tasks for the brewer, focusing on the spray head, dome plate, and brew basket rails.
Daily cleaning instructions for airpots and pour pots, including washing, rinsing, and sanitizing.
Overview of programmable parameters including brew temperature, volume, and pulse brew settings.
Detailed instructions for adjusting the brewer’s brew temperature, with a table of settings.
Instructions for setting the desired volume for a full brew cycle.
Instructions for setting the desired volume for a half brew cycle.
Guide to accessing and understanding the pulse brew settings and their corresponding READY light sequences.
Procedures to select and set the desired pulse brew option.
Information on how to view the brew cycle counter, which tracks the total number of brews performed.
Visual representations of the TLP series brewers with dimensions for installation planning.
Lists common supplies and accessories available for all TLP models.
An exploded view diagram showing the main components of the TLP series brewer chassis.
A detailed breakdown of part numbers and descriptions for the main chassis components.
A curated list of recommended parts for users to keep in stock for maintenance and repairs.
Detailed list of part numbers and descriptions for the WC-62086 tank assembly.
Recommended parts for the tank assembly that users should consider stocking.
Schematic diagrams illustrating the electrical connections and components of the TLP, TLP12A, and TLP12A19 models.
Critical safety warnings, important notes, and general guidelines for effective troubleshooting.
Procedures for testing inlet valves and diagnosing no power or control panel issues.
Diagnostic steps for water heating issues (no heat, too hot, too slow, not hot enough) and water tank fill problems.
Troubleshooting temperature sensor errors and issues with the water tank not filling or water level errors.
Diagnostic steps for brewing start failures, dispenser overflows, low fill levels, and coffee strength.
Overview of the error code system, how it's indicated by the READY light, and how to reset codes.
A table detailing specific error messages, their warning descriptions, and likely causes.
Details the limited warranty periods for parts and labor, along with general conditions of coverage.
Outlines specific conditions and exceptions that may void the product warranty.
Information regarding the process for repairs and replacements, including labor charges and service limitations.
Instructions and requirements for obtaining a Return Merchandise Authorization (RMA) for warranty claims.
To Next Page
