Curtis G3 Series - Installation Location and Water Supply

12
User manual Curtis G3 Series Alpha
Safety
Installation location
• A secure surface capable of supporting the weight of the
appliance.
• The machine must be set up so as to allow good visual access.
• The device must be placed and leveled on ahorizontal, sturdy,
water-resistant, and heatproof base.
• The device must not be cleaned using awater jet. The device
must be installed where it is protected against water spray.
• The device must not be located on asurface that is sprayed or
cleaned with awater hose, steam jets, steam cleaner, or similar
devices.
Water supply
On site:
• Water connection 3/8“ fl are
• Water pressure 0.14 - 0.62 MPa
• Min. fl ow rate 3.8l / min