Curtis G3 Series - Conditions for Use and Installation

13
User manual Curtis G3 Series Alpha
Safety
1.3 Conditions for use and installation
Risk of fi re and accidents
> The conditions for use and
installation listed in the “Technical
Data” chapter must be met.
> Before inserting the device plug,
ensure that the information on
the rating plate matches the mains
voltage for the installation.
> Installation is to be performed only
by a qualifi ed installer.
Any necessary on-site preparatory work for electricity, water, and
drainage connections at the customer‘s premises is to be arranged
by the machine owner/operator. The work must be carried
out by authorised installation technicians in compliance with
general, country-specifi c and local regulations. The CurtisService
engineers must only connect the coffee machine to existing
prepared connection points. CurtisService is neither authorised
nor responsible for carrying out any on-site installation work
prior to connection.
Risk due to electricalshock
• Improper electrical connection may
result in an electric shock hazard or
damage the unit. This brewer must
be properly grounded.
WARNING
Technical data
 page 50
WARNING