Curtis G3 Series User Manual

30
User manual Curtis G3 Series Alpha
Software | Control module
Pulse Brew Guidelines
- Filter pack type coffees typically extract better with
the A and B pulse setting.
- Decaffeinated coffees typically extract better with
the B pulse setting
- High-yield coffees typically extract better with the C
pulse setting. Of course, any of the A, B or C settings
may be used to suit your taste profi le.
- Settings D and E are manual pulse counts.
Display Brew Time - turs the display of the brew time
during brewing on or off (the factory default is ON).
Once accessed, press
or to choose the desired
setting, then, press
to exit.
Drip-out Mode - sets the drip-out mode timer. After
water stops fl owing, it allows additional time for the
water to drain from the brew basket before the brew
basket lock releases (the factory default is 2 min). This
feature reduces the chance that the brew basket will
be remoed too early. The range is OFF to 5 minutes.
Once accessed, press
or to choose desired setting,
then, press
to exit.
Display Messages - turns display of the message
„Rinse Server Before Brewing“ ON or OFF (the factory
default is ON). Once accessed, press
or to choose
desired setting, then, press
to exit.
Language - changes the language that appears on the
display (the factory default is English). Once accessed,
press
or to choose desired setting (English or
French), then press
to exit.
Model select - changes the model number and
number of batches (to match the label on the universal
control module, the factory default is Alpha 3/4/5 ).
Once accessed, press
or until the model number
matching the model number label on the brewer
appears, then press
.

Curtis G3 Series Specifications

General

Brand	Curtis
Model	G3 Series
Category	Brewing Systems
Language	English