Curtis G4 Series User Manual

INSTALLATION INSTRUCTIONS II35
DECANTER/DISPENSER BREWERS, INSTALLATION INSTRUCTIONS - 200F 080519A
Powering Up the Brewer (cont.)
24 When the water in the tank rises to the correct level, the
heating elements will turn on automatically. Depending
on the incoming water temperature and the electrical
TQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZSFRVJSFTUP
minutes to reach the factory set operating temperature.
When the water has heated, Ready to brew will be
displayed on the LCD screen.
25 Perform a brew cycle of a least 12 oz./350 ml to purge
any remaining air from the system. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
XIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZIFBSUIF
TPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFSUVCJOHBOE
water tank.
26 *GUIFVOJUJTFRVJQQFEXJUIBIPUXBUFSGBVDFUmMMB
coffee cup with hot water to purge air from the hot
water line.
IMPORTANT: When operating the brewer at
higher elevations, reduce the factory set operating
UFNQFSBUVSF¡'¡$CZ¡'¡$GPSFBDI
1000 ft./300 m of elevation above 4000 ft./1200 m.
See the PROGRAMMING GUIDE section.

Curtis G4 Series Specifications

General

Brand	Curtis
Model	G4 Series
Category	Brewing Systems
Language	English