CLEANING INSTRUCTIONS CI3
(&.4"5&--*5&$-&"/*/(*/4536$5*0/4ø "
Cleaning the Faucet Parts and Site Gauge (cont.)
10 Air Dry - Allow all parts to thoroughly air dry.
11 Reassemble - When dry, reassemble the handle/
bonnet. Hand tighten the handle/bonnet onto the
top of the faucet assembly. Reinstall the site gauge
(if applicable). If replacing a broken gauge glass,
carefully remove any traces of glass from the
silicone parts before inserting the new gauge glass
tube. Reinstall the lid.
To Next Page
Loading...
