EasyManua.ls Logo

Cushman Shuttle 2 - General Operation; Maintenance

Cushman Shuttle 2
86 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 - 5
SAFETY
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
1
communities may permit these vehicles to be operated on their streets on a limited basis and in accordance with local
ordinances.
With electric powered vehicles, be sure that all electrical accessories are grounded directly to the battery (-) post.
Never use the chassis or body as a ground connection.
Refer to GENERAL SPECIFICATIONS for vehicle seating capacity.
Never modify the vehicle in any way that will alter the weight distribution of the vehicle, decrease its stability
or increase the speed or extend the stopping distance beyond the factory specification. Such modifications
can result in serious personal injury or death.
Do not make any such modifications or changes. E-Z-GO prohibits and disclaims responsibility for all such modifica-
tions or and alterations which would adversely affect the safety of the vehicle.
Vehicles that are capable of higher speeds must limit their speed to no more than the speed of other vehicles when
used in a golf course environment. Additionally, speed should be further moderated by the environmental conditions,
terrain and common sense.
Operation of the vehicle is limited to persons above the height of 59 inches (150 cm).
GENERAL OPERATION
ALWAYS:
use the vehicle in a responsible manner and maintain the vehicle in safe operating condition
read and observe all warnings and operation instruction labels affixed to the vehicle
follow all safety rules established in the area where the vehicle is being operated
• Leave the vehicle when there is a risk of lightning.
reduce speed to compensate for poor terrain or conditions
apply service brake to control speed on steep grades
maintain adequate distance between vehicles
reduce speed in wet areas
use extreme caution when approaching sharp or blind turns
use extreme caution when driving over loose terrain
use extreme caution in areas where pedestrians are present
MAINTENANCE
ALWAYS:
replace damaged or missing warning, caution or information labels
maintain the vehicle in accordance with the manufacturer’s periodic service schedule
ensure that repairs are performed by trained and qualified personnel
follow the manufacturer’s maintenance procedures
insulate any tools used within the battery area in order to prevent sparks or battery explosion
check the polarity of each battery terminal and be sure to rewire the batteries correctly
use specified replacement parts, NEVER use replacement parts of lesser quality
use recommended tools

Table of Contents

Other manuals for Cushman Shuttle 2

Related product manuals