6.3 Alignment parameters
Referring to the front of the black mark, the value of “Black mark distance” value varies from -90.0 mm minimum and 23.0
mm maximum. If the “Black mark distance” value is set to 0, the alignment point is set at the beginning of the black mark.
negative values of
“Black mark distance”
-
PRINTING DIRECTION
positive values of
“Black mark distance”
+
Alignment
point
Alignment
point
Alignment
point:
black mark front
(“Black mark distance” = + A):
0
PRINTING DIRECTION
A+
Alignment
point
Edge of the
black mark
43
To Next Page
Loading...
