7.3 Cleaning
For periodic cleaning of the device, see the instructions below.
Platen roller Paper path
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
ISOPROPYL ALCOHOL
Disconnect the power supply cable and
open the device (see previous paragraphs).
Clean the platen roller by using a non-abrasive cloth
moistened with isopropyl alcohol.
Disconnect the power supply cable and
open the device (see previous paragraphs).
Remove any scraps of paper and the
accumulated paper dust on the platen roller and
in areas near to the paper presence sensor.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
Alcohol, solvent
1
2
1
2
Disconnect the power supply cable and
open the device (see paragraph 7.1).
Disconnect the power supply cable and
open the device (see paragraph 7.1).
51
To Next Page
Loading...
