AUTOCUTTER
Paper cut Total cut or partial cut
Estimated life
(1)
DEVICE ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ± 10% (optional external power supply)
Medium consumption
(5)
2.2 A
Typical consumption
(3)
0.8 A
Standby consumption 0.04 A
ELECTRICAL SPECIFICATIONS POWER SUPPLY code 963GE020000071 (optional)
Power supply voltage from 90 Vac to 264 Vac
Frequency from 47 Hz to 63 Hz
Output 24 V, 2.5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to +50°C
(6)
Relative humidity (RH) from 10% to 85% (w/o condensation)
Storage temperature from -40 °C to +70 °C
Storage relative humidity (RH) from 10% to 90% (w/o condensation)
NOTES:
(1) : Respecting the regular schedule of cleaning for the device components.
(2) : Damages caused by scratches, ESD and electromigration are excluded.
(3) : Referred to a standard CUSTOM receipt (L = 10 cm, density = 12.5% dots on).
(4) : For external rolls diameter higher to Ø 100 mm it’s recommended to use a paper pretensioning device.
(5) : Referred to the UL measurements (Print density = +50%, Ticket = 50% dots on, 1 ticket every 30 s).
(6) : If you use the device with the power supply code 963GE020000071, supplied as an accessory, the operating
temperature range is from 0 °C to +40 °C.
59
To Next Page
Loading...
