Custom Engineering KPM150-H - Printer Setup

32
PRINTER SETUP
Setup stampante
PRINTER NAME and
FIRMWARE MODULES
RELEASE
PRINTER SETTINGS
PRINTER TYPE ............................................KPM150-H
Barcode Reader............................................Not Present
RFID module .................................................Not Present
PRINTING HEAD TYPE................................SHEC T56
INTERFACE ..................................................RS232
PROGRAM MEMORY TEST.........................OK
DYNAMIC RAM TEST...................................OK
EEPROM TEST.............................................OK
CUTTER TEST..............................................OK
PRINTER HEAD Rav....................................700
HEAD VOLTAGE [V] = 24.15
HEAD TEMPERATURE [°C] = 22
POWER ON COUNTER = 662
PAPER PRINTED [cm] = 525000
CUT COUNTER = 825
DATE - TIME = 12/06/12 09:30
Printer Emulation......................................: SVELTA
RS232 Baud Rate ....................................: 115200 bps
RS232 Data Length..................................: 8 bits/chr
RS232 Parity............................................: None
RS232 Handshaking ................................: Xon/Xoff
Busy Condition .........................................: RxFull
USB Mass Storage...................................: Disabled
USB Address Number ..............................: 0
Print Mode................................................: Normal
Autofeed...................................................: CR Disabled
Chars / inch ..............................................: A=15 B=20 cpi
Speed / Quality.........................................: High Speed
Paper Width..............................................: 54 mm
Paper Threshold.......................................: 60%
Notch/B.Mark Position..............................: Disabled
Notch/B.Mark Threshold...........................: 40%
Notch Distance [mm]................................: +00.0
Notch/B.Mark Min.Width...........................: 0 mm
Ticket Locking...........................................: Disabled
PaperEnd Buffer Clear.............................: Disabled
Ticket Management..................................: Disabled
USB Virtual COM......................................: Disabled
AutoDetect Jam........................................: Disabled
Print Density.............................................: 0%
[LF] enter Printer Setup
[LF+FF] enter Clock Setup
[FF] skip Setup
KEYS
FUNCTIONS
PRINTER
STATUS
PRINTER
PARAMETERS
KPM150-H printer
SCODE:.................................... .....<code>
BCODE:.................................... .....<code>
FCODE:.................................... .....<code>
DCODE: ................................... .....<code>
UCODE: ................................... .....<code>
................CPLD ...................... .....rel 1.00