Need help?Do you have a question about the Custom Engineering KPM150H and is the answer not in the manual?
General| Technology | Thermal |
|---|---|
| Print Resolution | 203 dpi |
| Print Speed | 150 mm/s |
| Paper Width | 58 mm |
| Printing Technology | Direct Thermal |
| Maximum Print Width | 48 mm |
| Power Supply | 24V DC |
| Operating Temperature | 5°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Interfaces | USB |
| Cutter | Yes |
| Resolution | 8 dots/mm |
| Interface | USB, Serial |
| Memory | 4 MB Flash |
| Supported Barcode Types | UPC-A, UPC-E, EAN8, EAN13, Code39, Code93, Code128, ITF, Codabar |
| Humidity | 10% to 90% RH |
Explains the structure of the user manual.
Defines symbols and notes used in the manual.
Instructions for unpacking the printer and checking components.
Identifies external components of the printer models.
Shows connector views for the printer.
Illustrates internal components of the printer.
Explains key operations during the printer's power-up sequence.
Details key operations when the printer is in standby mode.
Describes the meaning of status LED signals.
Instructions for physically mounting the printer.
Guides on installing an optional near paper end sensor.
Details how to connect power and communication cables.
Shows connector pinouts for printer interfaces.
Lists OS and procedures for driver/SDK installation.
Instructions for adjusting the paper width using the guide lever.
How to set the notch sensor position for accurate paper feeding.
Step-by-step guide to power on the printer.
Instructions for loading a new paper roll into the printer.
How to enter configuration mode and print a setup report.
Details the contents and meaning of the printer's setup report.
Explains how to interpret printer status information.
Lists and explains various configurable printer parameters.
How to use the hexadecimal dump for diagnosing communication issues.
Instructions for setting the printer's real-time clock.
Step-by-step guide to clear paper jams from the printer.
Recommended schedule for cleaning printer components.
Detailed instructions for cleaning specific printer parts.
Guide to updating the printer's firmware.
Lists general, interface, memory, and printer hardware specifications.
Technical specs for RFID reader/writer options.
Provides mechanical dimensions for the printer models.
Details the dimensions of the power supply unit.
Details the ticket tray accessory for the B202H model.
Instructions for mounting the bracket accessory for the B202H.
How to connect the adapter cable for the KPM150H power supply.
How to enable and configure the printer's alignment sensors.
Explains the automatic sensor calibration process.
How to manage printer files via USB mass storage.
How to install drivers from the device's flash drive.
How to configure default parameters using the Setup.ini file.
To Next Page
