Custom Engineering KPM150H - Specifications for RFID reader;writer

Internal roll core diameter min 50 mm (+1 mm)
Core thickness 2 mm (+1 mm)
Paper end Not attached to roll core
Core type Cardboard or plastic
CUTTER
Paper cut Total
Estimated life
(2)
1 000 000 cutter number
ELECTRICAL SPECIFICATIONS
Power supply 24 Vdc ± 10%
Medium consumption
(3)
0,9 A
Standby consumption 0,09 A
POWER SUPPLY ELECTRICAL SPECIFICATIONS cod.963GE020000003
(OPTIONAL for KPM150H - SUPPLIED with B202H)
Power supply voltage from 90Vac to 264 Vac
Frequence from 47 Hz to 63 Hz
Current (output) 2,5 A
Power 60 W
ENVIRONMENTAL CONDITIONS
Operating temperature from 0°C to 50°C
Relative humidity from 10% to 85% (w/o condensation)
Storage temperature from -20°C to +70°C
Storage humidity from 10% to 90%
NOTES
(1)
: Electronic board.
(2)
: Respecting the regular schedule of cleaning for the device components.
(3)
: Referred to a standard CUSTOM receipt (L=10cm, Density = 12,5% dots on).
(4)
: For external rolls diameter higher to Ø100mm it’s recommended to use a paper pretensioning device.
7.2 Specifi cations for RFID reader/writer
KPM150H (models with RFID reader UHF), B202H (models with RFID reader UHF)
TRANSPONDER SPECIFICATIONS
Supported transponders
IATA RP1740C
ISO 18000-6C
7. SPECIFICATIONS
82 KPM150H-AERO User manual