Custom Engineering KPM150-H - Technical Specifications; Printer Specifications

37
TECHNICAL SPECIFICATIONS
PRINTER SPECIFICATIONS
Caratteristiche della stampante
GENERAL
Sensors
Ticket presence, head temperature, cover open, lower mobile detector for black
mark and translucent gap/hole (setting by software), ticket presence on output,
cover open, external near paper end
Interfaces
USB (communication speed: 12 Mbit/sec)
RS232 (communication speed: from 1200 to 115200 bps)
Head life
(1)
100 Km / 100M pulses
MTBF
(2)
89 165 hours
Noise level 66,3 dB
Printable barcode
UPCA, UPCE, EAN13, EAN8, CODE39, ITF, CODABAR, CODE93,
CODE128, CODE32, PDF417, DATAMATRIX, AZTEC, QRCODE
Emulations ESC/POS
TM
, SVELTA
MEMORIES SPECIFICATIONS
Receive buffer 64 Kbytes
Flash memory 16 Mbytes
Graphic memory Logos dynamic management (max 2MB graphics memory)
PRINTER SPECIFICATIONS
Resolution 203 DPI (8 dot/mm)
Printing method Thermal, fi xed head (8 dot/mm)
Printing mode Normal, 90°, 180°, 270°
Printing format Height/Width from 1 to 8, bold, reverse, underlined, italic
Character fonts
ESC/POS
TM
emulation
PC437, PC850, PC860, PC863, PC865, PC858 (euro), 2 TrueType fonts
(4)
Character font
(5)
ESC/POS™ emulation
(models with simplifi ed chinese font)
PC437, GB2312, 2 TrueType fonts
(4)
Character font
(5)
ESC/POS™ emulation
(models with traditional chinese font)
PC437, BIG5, 2 TrueType fonts
(4)
Character font
(5)
ESC/POS™ emulation
(models with extended chinese font)
PC437, GB18030-2000, 2 TrueType fonts
(4)
Character font
SVELTA emulation
20 embedded fonts and 2 TrueType fonts
(4)
Printing speed
(1) (6)
High quality = 80 mm/sec
Normal = 117 mm/sec
High speed = 167 mm/sec